FAMOUS Steel Engineering Company
Hangzhou FAMOUS Steel Engineering Co.,Ltd. USA-EUROPE Standard Engineering and Quality Control Build Our Brand Reliability! One Trial Order Bring Constant Cooperation! www.steelfabricat.com
Add to Cart
We Provide Cold roll forming machine with reasonble price in top quality in china.
Cold Roll Forming Machine Product Feature:
The metalic profile produced by roll forming machine look beautiful, elegant and noble. They are widely used for garden, factory, hotel, exhibition center and villa, etc.
Cold Roll Forming Machine Components:
Roll forming machine consists of Uncoiler, Coil sheet guiding device, Main roll forming system, Post cutting device, Hydraulic station, PLC control system and Support table.
Optional with Hydraulic Decoiler, Auto Stacker, Safe Cover, Pre-Cutting, Film Covering Device, and so on.
Cold Roll Forming Machine Working Flow:
Decoiling → Feeding & Guiding→ Flattening ( If needed ) → Pre- Punching / Cutting ( If needed ) → Roll Forming → Post Step pressing / Punching ( If needed ) → Post Cutting → Finished Products To Support Table
Cold Roll Forming Machine General Technical Specs
| No | Item | Parameter | Note | |
| 1 |
Suitable Material
| Type | Metal Sheet |
|
|
| Customized Profile | |||
| Thickness | 0.3-0.7mm | |||
| Yield Strength | 235MPA | |||
| 2 | Product Specs | Cover width | Customized Profile |
|
| Length | Any length |
| ||
|
3
| Power Specs | Type | 380V/3PH/50HZ | Up to Practical Profile |
| Main Motor | 3-11KW | |||
| Hydraulic | 2.2-5.5KW | |||
| 4 | Machine Specs | Transmission | Chain and Sprocket | Gearbox and Cardan Acceptable |
| Structure | Column Block Or Wall Plate |
| ||
| Shafter | No.45 steel tempered |
| ||
| Rollers | No.45 steel chrome coated | Cr12 or other acceptable | ||
| Cutting Blade | Cr12 quenched |
| ||
| Press Mould | Cr12 quenched |
| ||
| Punch Mould | Cr12 quenched |
| ||
| 5 | Working Capacity | Forming Speed | 15-20m/min for standard solution | Higher Speed Solution Available |
| Working Speed | Up to Length-set Cutting | |||
| 6 | Hydraulic Cantilever Decoiler (Optional) | Type | Hydraulic |
|
| Max. Capacity | 5 T/10T/15T |
| ||
| Suitable coil OD | 1200mm |
| ||
| Suitable coil ID | 508/610mm |
| ||
| Max Coil width | 1250mm |
| ||
| 7 | Forming Stand | 8-48 | Up to Practical Profile | |
| 8 | Forming Shaft Diameter | 55-120mm | Up to Practical Profile | |
| 9 | Type of Cutting | Length-set cutting after roll formed | Pre-cutting acceptable | |
| 10 | Control System | Mitsubishi PLC and Inverter |
| |
| 11 | Output Supporter | 2 Pcs Simple Supporter | Auto Stacker Optional | |
Our customized cold roll forming machinery mainly including follow types.
Machine Pictures:
